Varioboom (c-clamp mic microphone stand boom arm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Variable stands with variable booms for holding microphones, action cameras, lamps, tablets and the like in place.
- Ocena
- 0 / 5
- Polubienia
- 100
- Pobrania
- 367
- Wydruki
- 0
- Wyświetlenia
- 2611
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
I had the need to mount a USB-microphone and some other accessories to my workplace table. I didn't like what I could buy on Amazon, so I made my own “c-clamp microphone boom” and called it the “Varioboom”. The project grew a bit and now a am providing all my .stl-files for download here on Printables.
If you are not sure what parts to mix and match, start with the provided varioboom-microphone.3mf. Open it in your slicer an have a look at it.
An IMPORTANT thing to note is, that I am not providing an endless amount of end adapters. There are three end adapters (1/4in hole, 3/8in hole, 12mm hole). Everything you want the boom to hold needs to attach to one of these end adapters via an appropriate fastener. Unless of course you design your own end adapters, which I encourage anyone to do. Feel free to make changes to your Varioboom wherever you like.