Stealth Press F695-2RS Bearing Pulley Hub
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pulley hub for two F695-2RS bearings, to replace the bearing stack + spacers on the stealth press.
- Ocena
- 5 / 5
- Polubienia
- 58
- Pobrania
- 429
- Wydruki
- 10
- Wyświetlenia
- 1731
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v3.0
A pulley hub for F695-2RS bearings. The overall width is 9 mm.
May need tiny amount of support on the bottom surface, but might not be necessary.
Can print in whatever material you want, this part shouldn't be near any of the heat of a soldering iron.
Designed with 0.2mm layer height in mind.
________________________________________________________________________________________________________________
The motivation for this design was the observation that with the bearing stack, only one of the bearings outer races rotated. This design requires no spacers and prevents the line from getting caught in gaps between the bearings or spacers.