Sliding Sign (Clean/Dirty, Him/Her, Here/Not Here)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a simple sliding indicator sign :D
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 71
- Wydruki
- 1
- Wyświetlenia
- 374
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
⭐ The indicator and slider snap into the housing
⭐ No supports needed.
⭐ Built in tolerances for easy fits & smooth sliding
⭐ Drawing of the indicator included so you can customize your own
Indicator files are included for Clean/Dirty (_CD) and Him/Her (_HH)
If you want to get super clean looking top layers, here are my favorite tips:
Top Surface Skin Layers = 1
Top Layers = at least 3 (may need 4 or more if you use a low infill density)
Top Surface Skin Speed = 25mm/s
Top Surface Skin Line Width = .28mm
Monotonic Top Surface Order = On
Combing = Not in Skin
The idea here is to curate your top surface to be as clean as possible. The Top Surface Skin Layers gives you control over just the top layer. Having 3 (or more) top layers sets up a good foundation for the skin layer. Top Surface Skin Speed makes sure that your print speed is slow enough to allow for nice clean extrusion. Top Surface Skin Line Width minimizes the visibility of the individual lines. You could go even a little smaller, though not too much if you’re using a .4mm nozzle. Monontonic Top Surface Order makes sure that everything is printed and overlaps in the same direction, which produces uniformity in the top layer sheen. Combing: Not in Skin prevents the nozzle from dragging across the top of the print.