Piggybank Vase Mode (EU)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use this Piggybank to keep track of your savings!
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 61
- Wydruki
- 1
- Wyświetlenia
- 382
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
Hello everyone!
This is my entry for the Piggybank competition!
You can use this piggybank to keep track of your savings and sort your money accordingly!
You can use the centre section for storing banknotes.
I designed 2 versions:
- Piggybank (normal) – Holds all Euro coins
- Piggybank (small) - Holds all Euro coins except 1 and 2 cents
Print with signature facing the buildplate.
Recommended printer settings:
- Nozzle diameter : 0.4mm, haven't tried other nozzle sizes, but they should work.
- Vase mode, of course
- Bottom solid layers: 6
- Layer height: 0.3mm
- Slicing gap closing radius: 0.001mm
If you bump up the print speed you should be able to print this within 1 hour ;)
I used PETG for mine, but PLA should work too.
Let me know if you have any trouble, or post a make if you succeed!
Simply drop coins in from the top and watch them fall into place :)
Fun fact: the small version holds exactly €171,60 worth of coins
Update 19/11
- I noticed that sometimes coins could fall out when dropping them in, so I reduced the slot width to keep this from happening.
Denkte.