Cardinal joint bit holder- Print in Place
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screwing and drilling with the standard bit holder in inaccessible places is now possible using the cardinal joint
- Ocena
- 4 / 5
- Polubienia
- 6
- Pobrania
- 30
- Wydruki
- 1
- Wyświetlenia
- 320
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Screwing and drilling with the standard bit holder in inaccessible places is now possible thanks to the joint.
This is a print-in-place model with a gap of 0.3mm between the moving parts.
The first tests with my Prusa XL, 0.6mm nozzle, PLA (is certainly not the perfect material due to the mechanical stress) and a layer height of 0.15mm were positive. However, I need your feedback to optimize the adapter.
Do your bits clamp perfectly?
Does the joint work as it should?
One thing is for sure:
You will need an extended brim with (I recommend 40mm) on the print bed and support material on the outer cone edge to keep the model on the print bed until the end of the print.
Have fun printing