Inner rail basket for IKEA MAXIMERA kitchen drawer - no glue
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print twice and put them together. Or if you can, print the larger one at once!
- Ocena
- 5 / 5
- Polubienia
- 88
- Pobrania
- 236
- Wydruki
- 2
- Wyświetlenia
- 3084
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Update 9-1-23: Added the single piece version for bigger print beds. The included .3mf has a modifyer box to make the floor part with honeycomb infill and no top-bottom layers
This is a printable basket for the MAXIMERA drawer of Ikea kitchen. My drawer is 40cm tall, so roughly half of the height was empty.
The part is designed to be specular, so you'll need to print two pieces with no changes. Remove the supports and fit them together.
I've included the 3mf I saved for my personal print, with a modifier mesh to make the bottom with the infill only