Power strip clips for MasterForce rack shelving uprights
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Power strip clips for MasterForce rack shelving uprights. Hole pattern is 1.125" x 4" for #4 screws. CAD included
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 394
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
These are clips that slot into MasterForce rack shelving uprights. These are sold at Menards and other big box stores.
This particular clip is set up for a power strip with a screw pattern of 1.125" x 4" and uses #4 screws. The hole spacing on the rack is 1.5" so you use one row of screw holes on one bracket and the opposite ones on the second bracket. Attach bracket to power strip then press it into the holes on the frame and slide down to lock.
Printing
Material: PETG
Orientation: Print so layer lines go though clip arm. (you will need supports for the clip)
Infill: 15%
supports: bed only
FreeCAD 0.21.1 files included.