1 / 3

Power strip clips for MasterForce rack shelving uprights

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Wire

@Wire_21598

Power strip clips for MasterForce rack shelving uprights. Hole pattern is 1.125" x 4" for #4 screws. CAD included

Rating: 0 / 5
Likes: 6
Downloads: 24
Makes: 0
Views: 395
Reviews: 0

Updated at source: Nov 18, 2023

Model information

Source: Printables
Category: Organizers
License: Creative Commons — Attribution

Details Files (3)Makes & comments (Makes: 0) (Comments: 0)Remixes (0)Collections (7)

These are clips that slot into MasterForce rack shelving uprights. These are sold at Menards and other big box stores.

https://www.menards.com/main/storage-organization/garage-outdoor-organizers/freestanding-shelving-units/masterforce-reg-72h-x-24d-freestanding-shelving-unit-end-frame/m777224upr/p-1642874270840235-c-12652.htm

This particular clip is set up for a power strip with a screw pattern of 1.125" x 4" and uses #4 screws. The hole spacing on the rack is 1.5" so you use one row of screw holes on one bracket and the opposite ones on the second bracket. Attach bracket to power strip then press it into the holes on the frame and slide down to lock.

Printing

Material: PETG

Orientation: Print so layer lines go though clip arm. (you will need supports for the clip)

Infill: 15%

supports: bed only

FreeCAD 0.21.1 files included.

Power strip clips for MasterForce rack shelving uprights

Model information

Tags