Miami Dolphins Desk/table stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dolphins logo with name plate
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 128
- Wydruki
- 0
- Wyświetlenia
- 607
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Made a Miami Dolphins logo stand with base for name plate.
I created this on my Ender 3 Max Neo with GCode Pauses for filament swap.
This is the Filament swap I choose. I used all IIID MAX PLA+
Model comes in 3 parts. Upper Sun, Lower Sun with Base for name and the Dolphin. The three parts will need to be glued together.
I used Orange IIID Max PLA+ for the top and bottom Sun pieces.
For the name in the Dolphins font I went to:
Dolphins Font Download (fontmeme.com)
You can create the name into a PNG. From there I used Inkscape (although anything like this can be used) separated the colors and saved each one as an .SVG file. Put each into Tinker Cad and created a multilevel model of the name for the base plate area. I used white at 2mm and then swapped to Teal for 1mm which seemed to work out well.
The Dolphin, I swapped between White, Light Blue and Teal
Dolphin
Start with White
Line Level #51 Swap to Light Blue
Line Level #57 Finish with Teal