Prusa XL Piggy Bank
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Want to save for a Prusa XL? Or anything else actually :) this model will help you!
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 54
- Wydruki
- 4
- Wyświetlenia
- 777
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Model made for the competition Piggy Banks.
Inspired by the Original Prusa XL, approximately 1/5 scale with some liberties on the design were taken for easier printing without supports!
2023/11/19 - R3 Version, modified the holes for the filament on top, better fit. Removed
R2 and R1 from downloads.
2023/11/19 - R2 Version, you can add spools and spool holders.
2023/11/18- Just made the model, printing it right now, will update with pictures when done.
R3:

Printing Instructions:
No supports needed, PLA 0.4mm nozzle and standard profile 0.2mm structural/speed
- After printing cut and add 5 pieces of filament (about 15mm) form the extruders to the machine base, different colors recommended for extra bling bling.
R3: Can take up to 5 spool Holders, just like the real XL, Print as many as you need in the colors you want! :D