Prusa XL Piggy Bank
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.43 – €0.52 net (excluding VAT)
For file: R2 Holder x5_0.4n_0.2mm_PLA_MK4IS_26m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.47 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 25.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Want to save for a Prusa XL? Or anything else actually :) this model will help you!
- Rating
- 5 / 5
- Likes
- 31
- Downloads
- 54
- Makes
- 4
- Views
- 777
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Model made for the competition Piggy Banks.
Inspired by the Original Prusa XL, approximately 1/5 scale with some liberties on the design were taken for easier printing without supports!
2023/11/19 - R3 Version, modified the holes for the filament on top, better fit. Removed
R2 and R1 from downloads.
2023/11/19 - R2 Version, you can add spools and spool holders.
2023/11/18- Just made the model, printing it right now, will update with pictures when done.
R3:

Printing Instructions:
No supports needed, PLA 0.4mm nozzle and standard profile 0.2mm structural/speed
- After printing cut and add 5 pieces of filament (about 15mm) form the extruders to the machine base, different colors recommended for extra bling bling.
R3: Can take up to 5 spool Holders, just like the real XL, Print as many as you need in the colors you want! :D