Display case for 3.5" TFT with attached Feather board
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case for a 3.5" 480x320 Touchscreen display with a Feather board attached. Can be used on a desk or hung on wall
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 607
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
A couple of years ago I created a simple weather station using a M0 feather board and a TFT touch display to hang in our closet. We like to see the weather when getting dressed in the morning. My original mounting was just a bare piece of wood and looked crappy so now that I've learned how to do some CAD work I wanted to do a custom case. This is the result.
The model is in two parts. The “lid” is actually the back and the TFT+M0 stack mounts to it using black nylon M3 screws and spacers from the pictured kit. On the outside of the back I attached a picture hanger using some M2 screws and nuts I had lying around. The back is a snap-fit to the main case so no hardware is needed for that.
The TFT board I use is #3651 from Adafruit https://www.adafruit.com/product/3651 and the M0 feather is https://www.adafruit.com/product/3010. I printed it using Prusament Mystic Brown.