SV06 48mm Y Motor Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Y Motor(Bed) Mount that can Fit a Way bigger 48mm long Nema14 Motor
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 28
- Wydruki
- 1
- Wyświetlenia
- 361
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I had some left over 48mm Motors from upgrading my Voron A&B drive motors and wanted to put them on my SV06 but the stock Y mount can only fit a 40mm when the stock Motors are only 34mm tall. Also allows the Bed Belt block to impact the motor mount for the sensorless homing.
It does require you to flip the drive gear orientation, but I put a small line into the model that can be used to line up the center of the drive gear. Also has 2 small channels along the back side for wires with the bottom channel having a spot for Zip ties
It uses mostly the stock hardware but you will need
- (4x) M4x4mm Nut Heat Inserts
- 1 more M4x12 SHCS for the frame mount
- M3x8 or M3x6 BHCS for the last motor screw
The print file should be in the right Print orientation and I printed mine with Voron print setting in ABS. Make sure you use at least PETG as it is by the bed heater and the motor itself makes a fair bit of heat. Model has not been scaled for ABS shrinkage