More rigid Ebb36 -LDO orbiter - Eva 3.x mount with strain relief
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Variation of the original model with more stability for better accelerometer performance
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 748
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This model is meant for a vcore 3.1 machine using an ebb36 toolboard, an Orbiter 2 extruder and the standard Eva Carriage. It's supported the 3 screws at the base of the carriage, and the back of the motor with standoffs for tensioning it against it. It should provide much higher accuracy reading when using the ADXL on the toolboards.
It requires 16mm standoffs, so you can't use the ones provided with the ebb unless you cut them down (it doesn't require particular accuracy, as long as they are 16mm or shorter).