X/Y endstop Relocation for Ultra Light X Beam with Aluminum XY Joints by Common Anomaly
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made as an option to remain physical enstops with the CA X Beam. To avoid sensorless homing.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 872
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Update (22.11.23): Made the Jst Hole a bit more snug.
Update (28.11.23): Switch now as a bit more space. was to tight
Created as an option to keep physical endstops with the CA X Beam. Particularly useful when using TMC5160 stepper drivers, as these are rather annoying for sensorless homing. And if this is too imprecise, its prone to triggering too early and subsequently crashing the toolhead. And I personally do not like the fact that I can no longer trust my printer.
Switch needs to be secured with at least 1 M1.6 self tapping screw.
Made for those:
https://west3d.com/de-de/products/elite-ultralight-x-beam-for-voron-v2-4-and-trident
https://www.fabreeko.com/products/ultra-light-x-beam-with-aluminum-xy-joints-by-common-anomaly