1 / 2
Wall-mounted holder for Oral-B Pro 2 2500
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount an Oral-B Pro 2 2500 or similar electric toothbrush on a tile with an IKEA Tisken suction cup
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 410
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mount an Oral-B Pro 2 2500 with two brush heads on a tile with an IKEA Tisken suction cup.
Usage:
- Apply small amount of super glue at the dovetail connection and glue the two parts together.
- Remove the hook or other attachment from an IKEA Tisken suction cup.
- Attach holder to the suction cup.
Note: The holder was designed with an Oral-B Pro 2 2500 in mind, but will probably fit other toothbrushes with similar base and dimensions.
Print:
- Print with PETG for the necessary flexibility.
- "holder_top.stl" should be printed upside-down.
- “holder_bottom.stl” should be printed standing in its bottom.
- No support is necessary for any of the parts.
- Brim should not be necessary unless bed adhesion is not strong enough.
Credits: The adapter was made by Aphelion32.