IR-Sender Fernbedienung ESP8266 MQTT Smarthome
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here you can get the case for a ir-remote control. This case can hold a pcb and an ESP8266 for installing it in front…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 191
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here you can get the case for a ir-remote control. This case can hold a pcb and an ESP8266 for installing it in front of an stereo or TV system and control the system with infrared commands that will be send to the ESP8266 over WLAN in the MQTT protocol.
This is based on the article at https://www.chrisbue.de/ir-fernbedienung-mit-smarthome/
Print Settings
Printer Brand:
Anycubic
Printer:
Kobra 2
Rafts:
Yes
Supports:
Doesn't Matter
Resolution:
100%
Infill:
20 %
Filament: unknown PLA white
Notes:
Should be easy to print. Set the elements to for slicing next to each other and print.
How I Designed This
FreeCad
I designed this in FreeCad.
Category: DIY