French Cleat - cutting jig and mounting jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for a flexible French cleat system for organizing workshops using innovative mounting technique.
- Ocena
- 0 / 5
- Polubienia
- 140
- Pobrania
- 213
- Wydruki
- 0
- Wyświetlenia
- 3082
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
Very flexible organization system that holds an insane amount of weight for minimal cost of materials and tremendous amount of flexibility, scalability. I used to create 128 cleat rails of all equal width (14 sheets of plywood iirc?).
Includes square edge for initial cutting of the planks to rough dimension, then second line for bevel and straightening as necessary. It made a very long job of 16 cleat high wall of a 3 car garage. Made it easy to hang cabinets, dust extractor, tool shelf and workbench just on cleats alone.
Includes 2 holes for mounting vertically along studs to increase the strength of the rails, which is made even stronger with glue. Adding a second hole dramatically increases the strength of the cleat in multiple tests.
Jig designed to improve accurate and consistent cleat rails and consistent hole spacing for clean look in exposed work areas.
I designed 2 jigs:
- 1 jig for cutting the planks - rough cut, beveling/straightening, etc. Especially helpful with cutting down dimensional lumbar with or without a track saw.
- A second jig to be used for pre-drilling the mounting screw holes. Ensures consistent look and strong strength.
Both jigs helpful for when my workspace expands throughout other areas of the house and property/properties. Broad width of jig to improve leveling.