1 / 3
End cap for 19mm tubing 18mm ID
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
End Cap for RepRack: Open Source Spool Holder And Storage System
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 98
- Wydruki
- 0
- Wyświetlenia
- 317
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (12)Powiązane
If you have a pipe or tube with a 19mm OD and a 18mm ID, this will work for you!
I'd recommend printing in PETG but I've used PLA in similar situations and had no problems, but it's a hammer fit because of those silly little ribs that have been designed to slice off as it goes in to keep it nice and firm - and they do!
It goes great with this model here!
My thanks go to Peter H.