Glow Stake
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Have you ever needed to stand a glowstick up in the ground, if so, this is the thing for you. This stake allows for a…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 460
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Have you ever needed to stand a glowstick up in the ground, if so, this is the thing for you. This stake allows for a glowstick to snuggly fit in the top and then be staked in the ground. The stake has a hole and slot that can be used to attach a small diameter rope to assist with removing the stake from the ground later. I have only tested this with a single brand of glowstick, so some modifications may be required depending on the glowsticks. I also not tested the durability of using a mallet to drive the stake into hard ground so I can't comment on the durability yet. Below is a alink to the Free CAD drawing in case you would like to make any modifications.
https://github.com/tscofield/3d_print_camping_parts/blob/master/glow_stake.FCStd
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2.5
Rafts:
No
Supports:
No
Infill:
50%
Filament:
NA PET
Notes:
I used 5 perimeter passes to ensure there was a solid shell.
Category: Outdoor & Garden