Glow Stake
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Have you ever needed to stand a glowstick up in the ground, if so, this is the thing for you. This stake allows for a…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 23
- Makes
- 0
- Views
- 460
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
Have you ever needed to stand a glowstick up in the ground, if so, this is the thing for you. This stake allows for a glowstick to snuggly fit in the top and then be staked in the ground. The stake has a hole and slot that can be used to attach a small diameter rope to assist with removing the stake from the ground later. I have only tested this with a single brand of glowstick, so some modifications may be required depending on the glowsticks. I also not tested the durability of using a mallet to drive the stake into hard ground so I can't comment on the durability yet. Below is a alink to the Free CAD drawing in case you would like to make any modifications.
https://github.com/tscofield/3d_print_camping_parts/blob/master/glow_stake.FCStd
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2.5
Rafts:
No
Supports:
No
Infill:
50%
Filament:
NA PET
Notes:
I used 5 perimeter passes to ensure there was a solid shell.
Category: Outdoor & Garden