Wanhao Flex Plate for Micro Swiss - Realigned
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original plate didn't work well for me, as the hole was too small, and the lever was not aligned properly with the…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 184
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
The original plate didn't work well for me, as the hole was too small, and the lever was not aligned properly with the drive gear, so I made a new version and it works better for me. YMMV.
This only works for the MK10 gear, I made a separate one for the MK7 gear (which is slighly larger, and with the hole a bit offset).
I recommend using this lever: http://www.thingiverse.com/thing:1637225
Print with PETG with good infill (I used 80%), and good resolution (I used 0.12). Need support at the bottom.
Category: 3D Printer Extruders