Wanhao Flex Plate for Micro Swiss - Realigned
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The original plate didn't work well for me, as the hole was too small, and the lever was not aligned properly with the…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 20
- Makes
- 0
- Views
- 184
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
The original plate didn't work well for me, as the hole was too small, and the lever was not aligned properly with the drive gear, so I made a new version and it works better for me. YMMV.
This only works for the MK10 gear, I made a separate one for the MK7 gear (which is slighly larger, and with the hole a bit offset).
I recommend using this lever: http://www.thingiverse.com/thing:1637225
Print with PETG with good infill (I used 80%), and good resolution (I used 0.12). Need support at the bottom.
Category: 3D Printer Extruders