SPARKY v1.0: Test Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Test stand for SPARKY v1.0. Allows testing wheel rotation code without robot moving.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 134
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a test stand for the SPARKY v.10 robot. Use of this stand allows testing of code which activates the wheels without the risk of the robot driving off the desk.
Mounting holes are sized for M3x8mm screws & nuts.
Assembly: attach each side piece to the connector using M3x8mm screws and M3 nuts.
[Optional]: Add self-adhesive silicon bumpers to the indents on the bottom of the sides.
Part of the SPARKY educational robotics platform. See other SPARKY printables for additional parts. See the SPARKY Instructables for additional information.
Slicer Settings:
Models were printed on a Bambu X1C using PLA with 0.20mm layer height, “strength” settings, and no supports.
The test stand connector is laser cut from 3mm (1/8") B/BB Baltic Birch plywood on a Glowforge Pro.