Haunter Vault/Piggy Bank (No Supports/Infill Required)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Let Haunter hold on to your $ coins or money. Can be printed with PLA or TPU. 0% Infill, No supports, Easy Printing :]
- Ocena
- 0 / 5
- Polubienia
- 38
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 907
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution
This was the 3rd version after having bridging issues with a wider container. The model will work at varying scale as per preference.
I would recommend printing it a bit bigger and with thicker walls if you really want to store a lot of money. A bigger print would make it easier to take the money out through the eyes.
I printed it with PETG. The G-Code should work very well with most PETG to avoid stringing, retraction (pre-adjusted), print speed at 60mm/s. I had not tested it with PLA but it should be even easier to print with PLA. I would love to see how others would be printing the model. Cheers.