1 / 6
Haunter Vault/Piggy Bank (No Supports/Infill Required) — image 1
1 / 6

Haunter Vault/Piggy Bank (No Supports/Infill Required)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€9.00 – €11.00 net (excluding VAT)

For file: CE3S1_(PETG)HaunterVault.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €10.00 excluding VAT (range midpoint).

Weight reported by the author
134 g
Print time reported by the author
10 hr
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Let Haunter hold on to your $ coins or money. Can be printed with PLA or TPU. 0% Infill, No supports, Easy Printing :]

Rating
0 / 5
Likes
38
Downloads
80
Makes
0
Views
908
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

This was the 3rd version after having bridging issues with a wider container. The model will work at varying scale as per preference. 

I would recommend printing it a bit bigger and with thicker walls if you really want to store a lot of money. A bigger print would make it easier to take the money out through the eyes.

I printed it with PETG. The G-Code should work very well with most PETG to avoid stringing, retraction (pre-adjusted), print speed at 60mm/s. I had not tested it with PLA but it should be even easier to print with PLA. I would love to see how others would be printing the model. Cheers.

Tags