1 / 8
Cute Computer Bank (desk companion - kawaii piggy bank) — zdjęcie 1
1 / 8

Cute Computer Bank (desk companion - kawaii piggy bank)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cute kawaii-inspired piggy bank for kids or tech-loving adults :-) What color/face combo do you like the most?

Ocena
0 / 5
Polubienia
54
Pobrania
128
Wydruki
0
Wyświetlenia
1193
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

 

Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models, get access to exclusive models, and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my popular models

I wanted to make something kids-friendly for the piggy-bank-design-challenge - this is my try. A computer-piggy-bank with different faces for you to try - and some smooth shapes! And if you like the smooth yet tech-inspired look - maybe it goes well on your desk too ;-)

Overview

The model comes with multiple different face for you to attach. Please share your makes - would love to see the color/face combo you choose!

Assembly

The assembly should be fairly straight forward:

  1. Screw the screw in the bottom
  2. Glue (or otherwise stick) the screen onto the computer

(If you want to change screen every now and then, dont glue it. I use some sticker-thingy that can be reused)

Print instructions

Here is a few tips:

  • Orientation: All files should be printed as they are imported.
  • Supports: Maybe.. I have tried to make all overhangs printable. All files can be printed without supports (those on the pictures are printed without supports!), but the 'chin’ might be better with paint-on supports in that area. Just be sure NOT to have supports inside the model!
  • Layer height: For a smoother shape on the computer, consider using Variable layer height. (To do this, select the Computer when imported to the slicer - and press the Variable layer height in the top-center of the screen. Use default settings and press on Adaptive - should work that way in at least Prusaslicer and Bambu Studio)
  • Colorchange: On the screen part, you can make a simple color/filament change at 1.2 mm, to have the face another color

Happy printing!

Tagi