Z Belt Tensioner for Two Trees Bluer Plus
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You need two M3x12 screws and four M5x12 screws (or bit longer). Bearing uses from stock holders. I designed the mount…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 313
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
You need two M3x12 screws and four M5x12 screws (or bit longer).
Bearing uses from stock holders.
I designed the mount for printing with PETG plastic. The gap between the two parts is very small - only 0.15mm
Reduce the Body2 in the slicer a bit if it won't fit in "Body1" :)
For the opposite side, simply mirror the part in the slicer ...
The reason why I decided to change the tensioner is that the bearings in the stock tensioners "jumped" when moving the Z axis. It's very annoying to hear for me ;D
ps. The plug in the holes just needs to be drilled or pushed through with a screw, but no support is needed in the slicer
Print Settings
Printer Brand:
Two Trees
Printer:
Two Trees Bluer
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
50
Filament: DEXP PETG Black
Category: 3D Printer Parts