Z Belt Tensioner for Two Trees Bluer Plus
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
You need two M3x12 screws and four M5x12 screws (or bit longer). Bearing uses from stock holders. I designed the mount…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 23
- Makes
- 0
- Views
- 312
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
You need two M3x12 screws and four M5x12 screws (or bit longer).
Bearing uses from stock holders.
I designed the mount for printing with PETG plastic. The gap between the two parts is very small - only 0.15mm
Reduce the Body2 in the slicer a bit if it won't fit in "Body1" :)
For the opposite side, simply mirror the part in the slicer ...
The reason why I decided to change the tensioner is that the bearings in the stock tensioners "jumped" when moving the Z axis. It's very annoying to hear for me ;D
ps. The plug in the holes just needs to be drilled or pushed through with a screw, but no support is needed in the slicer
Print Settings
Printer Brand:
Two Trees
Printer:
Two Trees Bluer
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
50
Filament: DEXP PETG Black
Category: 3D Printer Parts