Bambulab Chamber Temperature and Humiditiy Sensor with neodium magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bambulab Chamber Temperature and Humiditiy Sensor with neodium magnets
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 656
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi Everybody
I designned a case for temperature and humid sensor in order tor secure the assmbley inside the chamber with neodium magnets. Incase of loose the sensor inside the chamber during printing session. I can't imagine it. Also I don't want to thrust on dual side types due to high temperature. I think this is the best way.
You wil need
Temp and Humid Sensor arround 3 USD
4 each Neodium Magnet 3mm diameter x 5mm height
and PetG filament is mandatory because of high chamber temperature
I preffer Esun PetG with printing Temperature 265 C i know beyond limit of flament but it seems more shiny and high stifness
Have a safe prints