Elegoo Neptune 3 Pro/Plus/Max CW2 Voron StealthBurner Fitting Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A non-destructive way to fit the stealthburner to the elegoo neptune 3 pro/plus/max series printers.
- Ocena
- 0 / 5
- Polubienia
- 71
- Pobrania
- 196
- Wydruki
- 0
- Wyświetlenia
- 3913
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A total re-design of my bowden version which was a remix this model was designed from scratch using the same dimensions but cutting out more material for clearance. I've also added a heatset hole in the side for the original neptune inductive probe.
Probe location is 2(ish)mm higher than where the nozzle should land.
Update, Version 8:
Dropped the whole thing 8mm as V7 wouldn't reach the bed if hard mounted, also fixed probe location to prevent interference with the backing plate.
Update, Version 9:
This is the final iteration used on my machine, it spaces the printhead far enough forward to allow the use of pan/cap head screws to fit to the original carriage and also moves the probe forward 2mm.
Printing:
Printed in PLA for Prototyping, ABS Reccomended.
.2 Layer Height
No Supports Needed
40% Infill
4 Walls,
4 Top & Bottom Layers
Parts Needed:
Stealth Burner Toolhead + Screws for fitting.
7x M3 Heatset Inserts
3x M3x18mm Screws
3x M3 Nuts (Nyloc reccomended)
1x M3x10mm Screw (Probe)
Klipper Config:
Probe Offsets:
x_offset: -29.3
y_offset: 32.37