Rain Bird Sprinkler Head Socket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1/2" Drive Socket to remove and replace Rain Bird sprinkler heads (i.e. model 42SA and equivalent)
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 601
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by Bicycle Bottom Bracket socket tools I measured and modeled a ½" drive socket to engage my Rain Bird sprinkler heads to aid in screwing and unscrewing them for replacement (without replacing the outer “cans”).
I've created models with both 2 slot engagement and 4 in case you have a preference.
*Disclaimer: My sprinklers are winterized now and not needing service so I haven't tried to test this in practice yet. I envision PETG or PLA+ with a strong infill would be needed to have a chance of not cracking apart in use.
My print shown is 80% infill of cubic subdivision, 0.2 layer height with inland PLA on an Ender 3 Pro. Printed without support.