Rain Bird Sprinkler Head Socket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
1/2" Drive Socket to remove and replace Rain Bird sprinkler heads (i.e. model 42SA and equivalent)
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 48
- Makes
- 0
- Views
- 601
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by Bicycle Bottom Bracket socket tools I measured and modeled a ½" drive socket to engage my Rain Bird sprinkler heads to aid in screwing and unscrewing them for replacement (without replacing the outer “cans”).
I've created models with both 2 slot engagement and 4 in case you have a preference.
*Disclaimer: My sprinklers are winterized now and not needing service so I haven't tried to test this in practice yet. I envision PETG or PLA+ with a strong infill would be needed to have a chance of not cracking apart in use.
My print shown is 80% infill of cubic subdivision, 0.2 layer height with inland PLA on an Ender 3 Pro. Printed without support.