Fellowes Shredder - End Bearing DM12CT
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Discovered the HEX to Round bearings at the drive end had worn out which allowed the cutters to bang against each…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Discovered the HEX to Round bearings at the drive end had worn out which allowed the cutters to bang against each other. Made a couple of bearingV0.3.stl in 618 transition nylon to use in the non drive end. Swapped the bearings from the non-drive end to the gear end.
(the additional files V0.1 and V0.2 were zeroing in on the sizing - there are subtle differences between the hex hole and the outer diameter between the models - otherwise use horizontal offset to adjust. The nominal diameter is 22 mm and the hex radius is 9 mm.
Category: Replacement Parts