Fellowes Shredder - End Bearing DM12CT
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Discovered the HEX to Round bearings at the drive end had worn out which allowed the cutters to bang against each…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 15
- Makes
- 0
- Views
- 122
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Discovered the HEX to Round bearings at the drive end had worn out which allowed the cutters to bang against each other. Made a couple of bearingV0.3.stl in 618 transition nylon to use in the non drive end. Swapped the bearings from the non-drive end to the gear end.
(the additional files V0.1 and V0.2 were zeroing in on the sizing - there are subtle differences between the hex hole and the outer diameter between the models - otherwise use horizontal offset to adjust. The nominal diameter is 22 mm and the hex radius is 9 mm.
Category: Replacement Parts