Navico System WD200 Anemometer Replacement Parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A friend was facing replacing a Navico Wind system on his 30 year old sailboat for the want of a cone.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 359
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
A friend was facing replacing a whole Navico Wind Direction and Speed system on his 30 year old sailboat because he was unable to find a replacement wind cup. So I reverse engineered the hub, cap, and cups for the Navico System 200 WD200. It fits together and we will test it for the first season. Printed in Bridge Nylon with supports - coated with a UV inhibitor. Also printed in ASA. {If you find this useful and want to offer thanks - just like at the club buy me the good feeling of a beer - by donating to the local food bank).
Print Settings
Printer Brand:
LulzBot
Printer:
TAZ 5
Rafts:
No
Supports:
Yes
Resolution:
.15 mm layers
Infill:
100
Filament:
Taulman Bridge Nylon
Notes:
If you have lost the whole thing you will also need two MR84ZZ bearings, two magnets (just steel) 5mm by 15 mm and a tiny C-clip. You can just print position 1 cup and trim with the attachment tabs with a knife for the different positions and also if you are re-using an existing cap. They should be correctly oriented with the cup up to print with z-g-zag supports underneath. If you use nylon a spray coating to reduce UV damage is recommended. There are two "enhancedprinting" parts - the hub and the cap. The original hub and cap while very similar to the Navico original parts are hard to print. The "enhancedprinting" parts make that easier - print with 20% fill and at least 2mm walls. Printing in ASA plastic was also successful.
Category: Sport & Outdoors