IKEA MÅLA Chalk holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for the oval shaped chalk from IKEA. Includes retaining ring.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 122
- Wydruki
- 0
- Wyświetlenia
- 784
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi!
This is a chalk holder I designed for a Key Grip who loves to use the ovular shaped MÅLA chalk from IKEA.
Features:
- Keeps your tool bag dustless
- ‘Friction based ’locking ring' to keep chalk in chuck
Printer Settings:
So this was a total nightmare to figure out, and I'm still not 100% happy with it. As it has to print vertically for the smooth curves, (I suppose I can try to print it ‘cut’, then glue it back together…) it becomes quite weak at the print lines, even at very high infill percentages.
I opted to print at a 35-degree angle on the build plate. Seems to hold up better.
Print file attached.
Current print settings : PLA, 35% tilted, 3 walls, 15% infill, Tree support ‘On Build Plate Only’, Brim Auto, I also painted on 2 additional supports along the shaft as it fell over without. Printed on a Bambu P1S.
Notes: I plan to print with ASA shortly. Hopefully it will have stronger layer adhesion properties. Will update with notes and photos.
Change Log:
Love the design? Consider buying me a coffee.