Gridfinity - Econo containers collection
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of popular gridfinity containers. With additional selection of: - Magnet stacking - Labels - Hex patterner bottom
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 212
- Wydruki
- 2
- Wyświetlenia
- 1226
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Perhaps this model shouldn't exist - I've needed some storage solution, gridfinity was obvious choice due to popularity - however, first thing I've noticed in original design was that it wanted to print 3 walls, and second - holes on the bottom for magnets required supports, otherwise wouldn't print nicely in air.
Obviously compatible with rest of the gridfinity parts, dimensions are:
Length and Width are multiples of 42mm.
Height is in multiples of 7mm
Decided to make my own variation, I've downloaded schematics and modelled my own version. First commit will include sizes of:
- 1x1x6
- 1x2x6
- 1x3x6*
- 1x4x6*
- 2x2x6
- 2x3x6
- 2x4x6
- 3x4x6
- 4x4x6
- 2x5x6
- 3x5x6
- 2x5x6
*added 04.092025
For now, only x6 height is made, as I've planned it for my own drawers. If the system prove being useful in my case, more versions will be produced.
Files are grouped in folders based on additional modifications:
Label slope (L), Magnet stacking (M), Hex pattern (H) on bottom.
If you want a 1x1x6 box that has label slope and hex bottom, download “Bin - 1x1x6_LH” file from “Bin Labels + Hex” folder.
If you want a 2x5x6 box that has plain bottom and magnet stacking, download “Bin - 2x5x6_M” file from “Bin Magnets” folder, and so on
No DIN912 required this time!
v0.1 - initial commit of 8 x 10 files for x6 height containers.
v0.2 - added 1x5x6 containers.
v0.3 - added 1x3x6 and 1x4x6 containers.