Prusa Support Pads for Felt
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Need a low profile foot for a Prusa? Here's one that includes a seat for felt.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
Unlike the rubber pads that come with the printer, I found better dampening through the use of felt pads, a spacer, a paver, and foam. Thanks @CNCKitchen for the research leading to this.
Reason for Creation:
I wanted to put the printer at its lowest profile height while quieting down the printer. I needed a spacer that could make up for that height.
Hardware used:
1 per spacer - 3/8 in White Round Medium Duty Self-Adhesive Felt Pads
https://www.homedepot.com/p/Everbilt-3-8-in-White-Round-Medium-Duty-Self-Adhesive-Felt-Pads-75-Pack-49957/300194068
Filament Used:
Polymaker Black
https://us.polymaker.com/products/polyterra-pla
Personal Printer Settings
Layer height: 0.30mm
Perimeters: 2
Infill: 15%
Infill Pattern: Grid
Top Fill Pattern: Monotonic Lines
Top Solid Layers: 2
Bottom Fill Pattern: Monotonic
Bottom Solid Layers: 2
Procedure:
- Print at least 4 of these with the profile face down
- Install the felt pads to each printed part
- Press the assembly into the Aluminum extrusion. Squeeze on the extrusion to aid in part insertion.
- Happy Printing!!!