1 / 4
Makita 419041-9 F/R Change Lever — zdjęcie 1
1 / 4

Makita 419041-9 F/R Change Lever

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A replacement change lever (also known as a forward/reverse switch) for Makita drills. Part number: Makita 419041-9

Ocena
0 / 5
Polubienia
12
Pobrania
337
Wydruki
2
Wyświetlenia
915
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
GNU General Public License v2.0

This is a replacement change lever (also known as a forward/reverse switch) for Makita drills. Save some time and money by printing this replacement part yourself!

This design is a replacement for part number Makita 419041-9. This part is used on many drivers/drills. Check compatibility with your tool here: https://www.ereplacementparts.com/fir-change-lever-p-89393.html under the “Compatibility” section.

 

Instructions

 

Printing

Tested and verified on the Bambu P1S. The printed part in the picture gallery above was printed in PLA with 15% infill

 

Installation

  1. Unscrew and remove the side panel of the drill

  2. Take out the old, broken change lever

  3. Slide in your newly 3D printed change lever, making sure to match the “U” shape 

  4. Replace the side panel and screw it back in

 

Post Installation

I recommend pushing the change lever back and forth a few times to loosen it up

Tagi