Redux: Quest 2 Helmet Attachment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an optimization for ASA
- Ocena
- 0 / 5
- Polubienia
- 40
- Pobrania
- 124
- Wydruki
- 0
- Wyświetlenia
- 1849
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
Small adjustments to @Chris_303543 very badass design. To complete this project, you will still need to download and print the non-included components. Please get the V3 components. I've also added my own knurled “screw fasteners”. I prefer nylocks as they are not likely to loosen.
Print in ASA, 15% honeycomb, +4 wall, 0.20mm layers. Use a brim for adhesion if necessary. Print with different colors for badass contrast. Complement a stranger and give them a high-five for all around good vibes.
BOM:
Stuff you will use from above:
- 5x M4 Nylock nuts
- 3x M4 Standard nut
- 2x M4x8mm Screws
- 3x M4x30mm Screws
- 3x M4x35mm Screws
- 2x 1/4in x 13/32in Compression Springs
- 2x M4 Washers
Assembly:
Print Parts! Use the V3 set from Chris' project. Replace the duplicates with my redux components. Use his instructions.
Helmet used: FMA Airsoft Helmet