Redux: Quest 2 Helmet Attachment
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an optimization for ASA
- Rating
- 0 / 5
- Likes
- 40
- Downloads
- 124
- Makes
- 0
- Views
- 1,849
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution
Small adjustments to @Chris_303543 very badass design. To complete this project, you will still need to download and print the non-included components. Please get the V3 components. I've also added my own knurled “screw fasteners”. I prefer nylocks as they are not likely to loosen.
Print in ASA, 15% honeycomb, +4 wall, 0.20mm layers. Use a brim for adhesion if necessary. Print with different colors for badass contrast. Complement a stranger and give them a high-five for all around good vibes.
BOM:
Stuff you will use from above:
- 5x M4 Nylock nuts
- 3x M4 Standard nut
- 2x M4x8mm Screws
- 3x M4x30mm Screws
- 3x M4x35mm Screws
- 2x 1/4in x 13/32in Compression Springs
- 2x M4 Washers
Assembly:
Print Parts! Use the V3 set from Chris' project. Replace the duplicates with my redux components. Use his instructions.
Helmet used: FMA Airsoft Helmet