1 / 2
Mario Style SKADIS piggy bank collection — zdjęcie 1
1 / 2

Mario Style SKADIS piggy bank collection

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mix and match customizable piggy bank collectio for IKEA SKADIS - Mario Style

Ocena
5 / 5
Polubienia
31
Pobrania
71
Wydruki
2
Wyświetlenia
684
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Wall-mounted
Licencja
Creative Commons — Attribution — Noncommercial

Hi there.

Here you are! An IKEA Skadis Mario Style piggy bank construction kit.

 

The Box

You can chose three different styles of boxes (mystery, dollar, euro) that attatch to the IKEA SKADIS System from CSD_Salzburgs IKEA SKADIS Universial Hook Set. 

 

The Inlays

The boxes can be customized with inlays of icon and screw head.

 

The Inserts

There are two inserts to chose from.  Both are designed as containers but you can also choose to cut the insert in the slicer. If you want to print the whole insert, place it upside down and use “minimum tree support”.

The coin insert is self-expalnatroy. It can be supplemented with the lage coin, that can be glued in place in the marked area.

 

The Canon

Make sure that your printer is dialed in well because the model is designed that there is some friction between bolt and the bore hole of lafette.  A test print of the two parts to check interference is recommended. Scale op or scale down the bolt to adjust friction.

The canon and lafette can be printed without support, depending on your printer. A brim for the lafette is recommended eather way.

To assemble the canon, you need to glue in place the bottom and bolts first. After the glue is set, put the bolts into the laffetes and glue the lafettes to the turntable. The turntable is then assembled to the canon box insert.

 

A stand alone version of the SKADIS stale and a lager version of the canon piggy bank is in development.

Have fun printing!

Tagi