Eight Ball - Support Free
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3d printed ball / sphere demo
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 366
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial
Demo of how to produce a realistic sphere / ball without support.
For show print at 10% infill,
Printing at 100% infill will improve the balance and make them roll better.
Model consists of sphere split into 2 parts - which are joined together by a separate double ended 3d printed screw.
Project file is only compatible with Bambu Studio and Orca Slicer.
If printing the model from STLs it is recommended that adaptive layer heights are used.
Plain versions of the ball with Fuzzy Skin are also included to demonstrate the further benefits in terms of quality possible by selecting this option.