Pressure Relief Valve Selector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement for the factory part that I could not find online. Cooks Fast Pot (knock off insta-pot).
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 251
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This fits snug on the pressure relief valve and has plenty of clearance from the lid.
I did not model in the feature that allows the valve to open and close. I trimmed masking tape on the original then transferred the tape to the one I printed and carefully trim the profile.
Be careful trimming is very likely to cause layers to separate depending on how the side cutters are oriented. I took small snips to minimize this.
Printer settings:
Default for Generic ABS
25% infill
Use a brim (my first attempt lifted without a brim, I have an enclosure)