Slug's Under-Stairs Spool storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A solution for storing your filament under the stairs, or anywhere you have an unfinished wall!
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 263
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a spool organizer system I designed to easily store my spools under the stairs in a place that otherwise couldn't be used.
The spool holders mount under the stairs as shown in the photos, and the rod holders mount to the vertical beams, while the spools lean up against the drywall between the beams.
The rod holders should work with any rod or tube ~30-40mm in diameter. I used PVS pipe and a couple random dowels I had laying around.
If you have any issues, feel free to contact me! this is a project I've been working on for ages, and I'd love to improve it further!
MOUNTING HARDWARE:
I use 8 x ¾ inch flathead cabinet screws to mount pretty much everything
PRINTING TIPS:
I bump up the infill and walls up by a little extra, but it's not too picky. I recommend PLA+ at least, and I do not recommend printing with silk, or exceptionally cheap filaments.