Slug's Under-Stairs Spool storage
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A solution for storing your filament under the stairs, or anywhere you have an unfinished wall!
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 17
- Makes
- 0
- Views
- 261
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
This is a spool organizer system I designed to easily store my spools under the stairs in a place that otherwise couldn't be used.
The spool holders mount under the stairs as shown in the photos, and the rod holders mount to the vertical beams, while the spools lean up against the drywall between the beams.
The rod holders should work with any rod or tube ~30-40mm in diameter. I used PVS pipe and a couple random dowels I had laying around.
If you have any issues, feel free to contact me! this is a project I've been working on for ages, and I'd love to improve it further!
MOUNTING HARDWARE:
I use 8 x ¾ inch flathead cabinet screws to mount pretty much everything
PRINTING TIPS:
I bump up the infill and walls up by a little extra, but it's not too picky. I recommend PLA+ at least, and I do not recommend printing with silk, or exceptionally cheap filaments.