1 / 3
Voron V0.2 R1 Z-Axis Linear Rail Stopper Fix - “Mushroom Mod" — zdjęcie 1
1 / 3

Voron V0.2 R1 Z-Axis Linear Rail Stopper Fix - “Mushroom Mod"

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These endstops fix the Z-axis issue on the Fysetc V0.2 R1 kit where the first few layers are over-extruded.

Ocena
5 / 5
Polubienia
38
Pobrania
269
Wydruki
6
Wyświetlenia
1400
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

“Mushroom Mod"

My buddy BallisticTech sent me the video linked below that explains an issue with overextrusion on the first few layers, followed by perfect prints. I have been battling this issue for WEEKS on my Fysetc V0.2 R1 kit. I have taken the z-axis apart, aligned, and recalibrated the machine countless times. Just when I almost gave up on having perfect prints on this thing, SmallBatchFactory found the issue! 

So, here is my fix for the Fysetc Linear Rail Endstops in 1, 2, and 3mm options. I have 2mm versions on mine and it has completely fixed this machine.

Issue:

Tagi