Rolling Top Storage Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by woodworking item this box was created as CAD modeling self challenge and now shared with community.
- Ocena
- 4,873 / 5
- Polubienia
- 1130
- Pobrania
- 6471
- Wydruki
- 63
- Wyświetlenia
- 35 712
- Oceny
- 55
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Remove MINI version until I print it and tune.
------------------------------------------------------------
UPDATE 8/5
Reworked pins for better strength.
Updated files - Pin x3, Drawer (all versions) and Rolling Top.
---------------------------------------------------------------
Assembly is straight forward, easiest to assemble on one of the sides.
No gluing required, even though you may want to glue some parts - up to you.
IMPORTANT - All tolerances are very high to snap fit without glue! Printer must be properly calibrated for parts to fit.
---------------------------------------------------------------------------------------
Optionally you can print the drawer with 2 3 4 or 6 compartments.
For 2 compartments you need to print - ‘Drawer - 2-4c’ + ‘Divider - 2-3c’ + ‘Drawer Front - 2-4c’
For 3 compartments you need to print - ‘Drawer - 3-6c’ + ‘Divider - 2-3c’ x2 + ‘Drawer Front - 3-6c’
For 4 compartments you need to print - ‘Drawer - 2-4c’ + ‘Divider - 4-6cv’ + ‘Divider - 4ch’ ‘Drawer Front - 2-4c’
For 6 compartments you need to print - ‘Drawer - 3-6c’ + ‘Drawer Front - 3-6c’ + ‘Divider - 4-6cv x2’ + ‘Divider - 6cv’
Another option dividing top part to 2 compartments.
For this you need to print alternative Shelf Divided and Top Shelf Divider.
---------------------------------------------------------------------------------------
PLEASE REPORT ANY ISSUE DURING PRINTING OR ASSEMBLY I WILL BE GLAD TO HELP!