Rolling Top Storage Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Inspired by woodworking item this box was created as CAD modeling self challenge and now shared with community.
- Rating
- 4.873 / 5
- Likes
- 1,130
- Downloads
- 6,471
- Makes
- 63
- Views
- 35,712
- Reviews
- 55
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Remove MINI version until I print it and tune.
------------------------------------------------------------
UPDATE 8/5
Reworked pins for better strength.
Updated files - Pin x3, Drawer (all versions) and Rolling Top.
---------------------------------------------------------------
Assembly is straight forward, easiest to assemble on one of the sides.
No gluing required, even though you may want to glue some parts - up to you.
IMPORTANT - All tolerances are very high to snap fit without glue! Printer must be properly calibrated for parts to fit.
---------------------------------------------------------------------------------------
Optionally you can print the drawer with 2 3 4 or 6 compartments.
For 2 compartments you need to print - ‘Drawer - 2-4c’ + ‘Divider - 2-3c’ + ‘Drawer Front - 2-4c’
For 3 compartments you need to print - ‘Drawer - 3-6c’ + ‘Divider - 2-3c’ x2 + ‘Drawer Front - 3-6c’
For 4 compartments you need to print - ‘Drawer - 2-4c’ + ‘Divider - 4-6cv’ + ‘Divider - 4ch’ ‘Drawer Front - 2-4c’
For 6 compartments you need to print - ‘Drawer - 3-6c’ + ‘Drawer Front - 3-6c’ + ‘Divider - 4-6cv x2’ + ‘Divider - 6cv’
Another option dividing top part to 2 compartments.
For this you need to print alternative Shelf Divided and Top Shelf Divider.
---------------------------------------------------------------------------------------
PLEASE REPORT ANY ISSUE DURING PRINTING OR ASSEMBLY I WILL BE GLAD TO HELP!